new material
Polyaniline rods provide optimized electrical conductivity, superior electrochemical stability, and enhanced mechanical flexibility. Designed for sensors, batteries, and coatings, they ensure efficient charge transport, extended durability, and high adaptability.
Product Overview
Polyaniline adsorbent is a highly efficient material designed for adsorption, excelling in the removal of organic compounds, chloride ions, fluoride ions, and metal ions. Based on polyaniline, this adsorbent exhibits strong chemical stability, allowing it to work effectively in both highly acidic and alkaline environments. Its wet powder form provides a large surface area, enabling effective adsorption of pollutants in water. This adsorbent is widely used in wastewater treatment, significantly improving water purification efficiency.
Key Features
- High Adsorption Capacity:Performs excellently in adsorbing a variety of pollutants, such as COD in organic wastewater, chloride ions in desulfurization wastewater, and fluoride ions in high-fluoride raw water.
- Good Acid-Base Resistance:The polyaniline adsorbent can withstand a wide pH range (0-14), maintaining stable performance across different acidic and alkaline environments.
- Broad Applicability:Shows excellent adsorption ability for various metal ions, particularly heavy metals like Hg, Ge, Sn, Cd, significantly reducing the concentration of these harmful substances.
- Wet Powder Form:The wet powder form of the adsorbent ensures rapid contact with waterborne pollutants, improving adsorption efficiency.
Applications
- Wastewater Treatment:Primarily used for adsorbing chloride ions, fluoride ions, and metal ions, particularly in desulfurization wastewater treatment and high-fluoride raw water purification.
- Organic Wastewater Treatment:Effectively removes COD from organic wastewater, improving water quality.
- Environmental Protection:Plays an important role in industrial wastewater treatment, sewage purification, and other environmental protection applications.
| Parameter | Value |
| Length | 0.5-2 μm (SEM) |
| Diameter | 150-250 nm (SEM) |
| State | Wet powder |
| Color | Black |
| Moisture Content | 50-60 wt% |
| Acid-Base Resistance | pH (0-14) |
| 1000 ppm COD | One-time adsorption rate 20-30% (Organic wastewater) |
| 20000 ppm Chloride | One-time adsorption rate 48% (Desulfurization wastewater) |
| 20000 ppm Fluoride | One-time adsorption rate 90% (High fluoride raw water) |
| Metal Ions (500 ppm below) | Hg, Ge, Sn, Cd, Pb, As, Ni, Fe, Zn: One-time adsorption rate 90% (300 mg/g or higher) |
| Ca: One-time adsorption rate 70% | |
| Mg: One-time adsorption rate 5% |
